The Federal Chamber of Automotive Industries (FCAI) welcomes the opportunity torespond to the proposed changes to the NSW Motor Dealer and Repairers Regulation(MDDR) 2014. We understand that the current Regulation is due to be repealed on 1September 2025 unless it is remade, and that NSW Fair Trading has developed aRegulatory Impact Statement (RIS) for the […]
30 May 2025
The Federal Chamber of Automotive Industries (FCAI) welcomes the chance to respond to the proposed revision of the Motor Vehicle Insurance and Repair Industry (MVIRI) Code of Practice. We understand that this consultation draft of the Code has been developed by the Code Administration Committee (CAC), consisting of representatives from the Insurance Council of Australia […]
24 April 2025
The Federal Chamber of Automotive Industries (FCAI) welcomes the chance to respond to the Productivity Commission’s Inquiry on Opportunities in the Circular Economy. We understand that this Inquiry aims at informing the Australian Government’s policymaking regarding strengthening Australian circular economy by: • investigating and reporting on the potential scope to lift Australia’s materials productivity and […]
4 November 2024
Introduction: As the Australian, and global, economy journeys towards Net Zero, the importance of thorough debate and consultation across sectors cannot be understated. The Federal Chamber of Automotive Industries (FCAI) welcomes the opportunity to provide this submission on the Transport and Infrastructure Net Zero Consultation Roadmap (Consultation Paper). The FCAI is the peak Australian industry […]
20 August 2024
The Federal Chamber of Automotive Industries (FCAI) welcomes the opportunity to provide our views on A Future Made in Australia: Unlocking Australia’s low carbon liquid fuel opportunity. The FCAI is the peak Australian industry organisation representing over 60 global automotive brands who design, manufacture, import, distribute and sell light duty passenger vehicles, light commercial vehicles, […]
19 July 2024
The Federal Chamber of Automotive Industries (FCAI) has submitted its response to the joint consultation led by the Department of Infrastructure, Transport, Regional Development, Communications and the Arts (DIRTDCA) and National Transport Commission (NTC) on proposed automated vehicle safety reforms. The FCAI welcomes the department and NTC’s leadership in developing a framework that aims to […]
Learn More from FCAI Submission to Automated Vehicle Safety Reforms
18 July 2024
The Federal Chamber of Automotive Industries (‘FCAI’) welcomes the opportunity to provide this submission to the Standing Committee on Climate Change, Energy, Environment and Water (‘the Committee’) regarding the Inquiry into the Transition to Electric Vehicles (EV). As the Peak Body representing automotive manufacturers, importers and distributors within Australia the FCAI is uniquely placed to […]
Learn More from FCAI response to Inquiry into the Transition to Electric Vehicles
17 May 2024
The Federal Chamber of Automotive Industries (FCAI) welcomes the opportunity to provide a submission for the 2024–25 Budget. The FCAI is the peak representative organization for companies who distribute new passenger vehicles, light commercial vehicles and motorcycles and all-terrain vehicles in Australia. We urge the Federal Government to enhance investment in recharging infrastructure across Australia. […]
Learn More from FCAI response to 2024–25 Pre-Budget submissions
19 April 2024
The Federal Chamber of Automotive Industries (FCAI) welcomes the opportunity to provide our views on the NSW Governments Statutory review of the Gas and […]
6 March 2024
The Federal Chamber of Automotive Industries (FCAI) welcomes the opportunity to provide our views to NSW Parliamentary inquiry on Electric and hybrid vehicle batteries. The Australian vehicle fleet is changing and will continue to do so in response to the various state and federal policies and initiatives. In order to reduce emissions of the Australian […]
Learn More from FCAI Response to NSW Parliamentary Inquiry on Electric and Hybrid Vehicle Batteries
24 November 2023
The Federal Chamber of Automotive Industries (FCAI) welcomed the opportunity to provide its views to the Federal Government’s Fuel Efficiency Standard (FES) consultation. The FCAI and its members – which includes manufacturers of vehicles ranging from battery electric through to petrol and diesel engines – want to continue to play their role in combating climate […]
Learn More from FCAI submission to Fuel Efficiency Standards consultation
25 August 2023
On 8 September 2022, the Australian Government’s Climate Change Bills passed the Senate, introducing an emissions reduction target of 43 per cent and net zero […]
Learn More from FCAI National EV Strategy Consultation Paper Submission
25 November 2022
The FCAI welcomes the opportunity to respond to the NTC’s discussion paper on “On-road enforcement for automated vehicles” in Australia. This response builds on […]
Learn More from FCAI Submission to NTC On-road enforcement for Automated Vehicles in Australia
13 September 2022
The Federal Chamber of Automotive Industries (FCAI) welcomes the opportunity to provide input into the Low Emissions Technology Statement 2021 (LETS 2021) and […]
Learn More from FCAI Submission to: Low Emissions Technology Statement 2022
3 February 2022
The Federal Chamber of Automotive Industries (FCAI) is the peak industry organisation representing the importers of passenger vehicles, light commercial […]
3 December 2021
The Federal Chamber of Automotive Industries (FCAI) welcomes the opportunity to provide input into Resources Safety and Health Queensland’s discussion paper – […]
12 November 2021
FCAI member organisations, their parent entities and related supply chain partners are at the cutting edge of innovation. According to the US Auto Alliance, in […]
Learn More from FCAI Submission to NTC The Regulatory Framework for Automated Vehicles in Australia
17 September 2021
The Federal Chamber of Automotive Industries (FCAI) welcomes the opportunity to provide input into the South Australia’s Road Safety Strategy to 2031 aligning […]
Learn More from FCAI Submission to South Australia’s Road Safety Strategy to 2031
3 August 2021
The Federal Chamber of Automotive Industries (FCAI) welcomes the opportunity to provide input into the Queensland Government inquiry into Vehicle Safety, […]
15 April 2021
The Federal Chamber of Automotive Industries (FCAI) welcomes the opportunity to provide input into the Economics Legislation Committee’s inquiry into the COAG […]
Learn More from FCAI Submission – Economics Committee No EV tax bill
7 April 2021
The Federal Chamber of Automotive Industries (FCAI) welcomes the opportunity to provide input into the Future Fuels discussion paper – February 2021. FCAI […]
Learn More from FCAI Submission to: Future Fuels Strategy Discussion Paper
1 April 2021
This submission is made by the Federal Chamber of Automotive Industries (FCAI) in response to Exposure Draft of the Competition and Consumer (Motor Vehicle […]
17 February 2021
This submission is made by the Federal Chamber of Automotive Industries (FCAI) in response to Exposure Draft of the Competition and Consumer Amendment (Motor […]
The new National Road Safety Strategy 2021 ~ 2030 (NRSS) is an important initiative which has the full and unreserved support of the Federal Chamber of […]
21 August 2020
The FCAI welcomes the opportunity to make this submission to the National Transport Commission on the subject of “Review of Guidelines for trials of Automated […]
3 July 2020
The FCAI welcomes the opportunity to make this submission to the National Transport Commission on the subject of “Government Access to Vehicle Generated Data […]
The FCAI welcomes the opportunity to make this submission to the Australian Communications Media Authority (ACMA) concerning the Draft five-year spectrum […]
Learn More from FCAI Submission in response to ACMA Consultation – Draft 5 Year Spectrum Outlook
30 June 2020
The FCAI welcomes the opportunity to make this submission to the Department of Industry, Science, Energy and Resources concerning the Technology Investment […]
Learn More from FCAI Submission in response to Discussion Paper – Technology Investment Roadmap
22 June 2020
The FCAI has provided feedback in a submission on the draft National Roadmap on Driver Distraction. […]
Learn More from FCAI submission in response to National Roadmap on Driver Distraction
4 February 2020
The Federal Chamber of Automotive Industries (FCAI) is the peak industry organisation representing the importers of passenger vehicles, light commercial […]
Learn More from FCAI Submission in response to Joint Select Committee on Road Safety
The Federal Chamber of Automotive Industries (FCAI) is the peak industry organisation representing the importers of passenger vehicles, light commercial […]
To facilitate the introduction of automated and connected vehicles, it is important to harmonise with the relevant overseas market’s vehicle technical and […]
Learn More from FCAI Submission to the Acma Consultation on C-Its
28 September 2016
On 7 October 2015 the Productivity Commission released an issues paper to assist stakeholders in preparing submissions to the public inquiry into Intellectual […]
Learn More from FCAI Submission to the Pc Inquiry Into Intellectual Property Arrangements
30 November 2015
The FCAI welcomes the opportunity to make this supplementary submission to the review of the Motor Vehicles Standards Act 1989. This submission follows earlier […]
Learn More from FCAI Supplementary Submission to the Motor Vehicle Standards Act Review
26 June 2015
The Australian automotive industry is one of Australia’s most advanced industries. It deploys advanced manufacturing techniques, technologies and adds value […]
2 March 2015
The FCAI opposes the Australian Government’s proposal to remove $900 million from the ATS and close the scheme on 1 January 2018 as outlined in the Automotive […]
Submission to the Australian Competition and Consumer Commission for the Review of the Consumer Product Safety Standard for child restraint systems for use in […]
9 January 2014
Submission to the Productivity Commission for the inquiry into Australia’s automotive manufacturing. The Allan Consulting Group report The strategic role of the […]
Learn More from Submission to the Inquiry Into Australia’S Automotive Manufacturing Industry
28 November 2013
Submission to the Department of Infrastructure and Transport in response to the Regulation Impact Statement for Brake Assist Systems. […]
Learn More from Submission to the Department of Infrastructure and Transport – Brake Assist Systems
30 June 2013
Submission to the Department of Infrastructure and Transport in response to the Regulation Impact Statement for the Control of Light Commercial Vehicle […]
Submission to the Department of Infrastructure and Transport in response to the public consultation process on the Motor Vehicle Standards Act 1989. […]
Learn More from Submission to the Department of Infrastructure and Transport – Mvsa 2013 Review
3 October 2012
Submission to the Department of Infrastructure and Transport in response to the Discussion Paper on a new approach to comparing the environmental performance of […]
Learn More from Submission to the Department of Infrastructure and Transport – Green Vehicle Guide
The Federal Chamber of Automotive Industries (FCAI) contends that the current level of shared information relevant to motor vehicle maintenance and repair is […]
Learn More from Submission to the Commonwealth Consumer Affairs Advisory Council
4 October 2011
Attachments to support the submission […]
Learn More from Submission to the Commonwealth Consumer Affairs Advisory Council (Attachments)
This submission has been prepared in response to the Commonwealth Consumer Affairs Advisory Council’s (CCAAC) July 2009 Issues Paper, Consumer rights – […]
1 July 2009
The FCAI is the peak industry organisation representing vehicle manufacturers and importers of passenger vehicles, light commercial vehicles and motorcycles in […]
Learn More from Submission to the Review of Australia’s Future Tax System – March 2009
1 March 2009
The Federal Chamber of Automotive Industries (FCAI) provides the following submission to the Review of Australia’s Automotive Industry.
The FCAI is the peak […]
Learn More from Submission to the Review of Australia’s Automotive Industry
16 July 2008